SOFTWARE

Audio Plug

Several Steps to Get the Driver for Your Audio Controller

When it's time we have to reformat our computers, we may often get through the troubles that the drivers which used to be there are out of work or disappear then. Therefore, the computer hardware could not work well. In these cases, the most common reason is that the correct driver is not installed. A multimedia audio controller driver allows the operating system to talk to speakers, microphones, line-in/out, and other related devices. Normally, download another driver could resolve such problem.

 

Instructions on getting the correct audio controller driver:

 

Step 1

Determine the manufacturer of your multimedia audio controller. If you have just purchased the audio device, just check the box. If you are trying to install drivers on a computer where the device is already installed, you may have to disassemble your computer and look at the card to determine the manufacturer. Nevertheless, if your audio plugs are attached directly to your motherboard (open up the computer and look inside if you're not sure), you will use the manufacturer' motherboard. Otherwise, if you do not have the installation disc, locate the website of the manufacturer of the device driver and download the audio controller driver for your operating system.

 

Step 2

Double-click on the file that was downloaded or located on the installation disc. This will start the installation process for the multimedia audio controller.

 

Step 3

Click on the "Install" button. With most device drivers, a window will appear while the program examines your system, and then a window will show up that will inform you that you are about to install the driver. There will be a "Start" or "Install" button on that screen. The screen will also tell you the name of the multimedia audio driver that you are installing.

 

Step 4

Observe the window for errors. As the installation process continues, the window will update with information, check marks, or a progress bar indicating the progress of the installation. If there are errors during the install process, they will appear on this screen. If the software fails to find the multimedia audio device installed, it may indicate an error. If the audio device isn't physically installed correctly, that would also produce an error in this step.

 

Step 5

Click the "Finish" button. In most cases, when the driver installation is complete, the computer will need to be restarted. The screen with the "Finish" button will indicate if a re-start of your computer is needed.

 

Step 6

Check that your driver has installed. After the re-start, or after the installation finishes, go to the Control Panel and check "Audio Devices." Your newly installed multimedia audio controller driver should appear in that section. You can click on your audio device and change the various settings for volume levels, recording levels, and other information regarding your device there.

 

 

 

About the Author

If your computer encounters unknown problems, the first step you should take is to update or install new intel driver. For further problems about your pc, the authour will tell you somewhere in details.

Where do you plug the audio cable into your laptop to your tv as monitor?

I'm trying to connect my PC to my tv to view a movie, but where do I plug the audio cable into my laptop? There is a microphone and a headphone jack.

headphone is the output, put it in there

Eleven: Dave Navarro rocks Eleven - Audio Plug-in for Pro Tools